To Next PageTo Next Page
Need help?Do you have a question about the Vermont Castings DutchWest 2460 and is the answer not in the manual?
General| Brand | Vermont Castings |
|---|---|
| Model | DutchWest 2460 |
| Category | Heater |
| Language | English |
Emphasizes following installation and maintenance directions for fire safety.
Details physical dimensions, heat output, and EPA emissions ratings for models 2460, 2461, 2462.
Specifies acceptable chimney types, including masonry and prefabricated, and their condition.
Describes approved methods for passing connectors through combustible walls with clearances.
Details minimum dimensions and materials for noncombustible floor protectors for various installations.
Discusses methods for safely reducing stove clearances using heat shields and connectors.
Provides minimum clearance distances between the stove and surrounding walls, trim, and mantel.
Presents detailed clearance requirements for different models, installations, and heat shield configurations.
Provides measurements from the flue collar centerline to walls for top-exit installations with rear heat shields.
Illustrates dimensions and placement for rear, side, and corner wall heat protection.
Step-by-step instructions for attaching the stove legs and the required bottom heat shield.
Explains the function of the primary and secondary air controls and their effect on the fire.
Outlines the terms and duration of limited warranties for different stove parts and catalyst.
Details the process for claiming warranty service and lists exclusions and limitations.
