Vermont Castings Signature VC3624GS User Manual

If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flames.
3. Open door.
4. If odor continues, keep away from the appliance
and immediately call your fire department.
Failure to follow these instructions could result
in fire, explosion or burn hazard, which could
cause property damage, personal injury or death.
1. Never operate this appliance unattended.
2. Never operate this appliance within 10 feet
(3.05m) of any other gas cylinder.
3. Never operate this appliance within 10 feet
(3.05m) of any flammable liquid.
Failure to follow these instructions could result
in fire, explosion or burn hazard, which could
cause property damage, personal injury or death.
ASSEMBLER / INSTALLER: Leave these instructions with the consumer.
CONSUMER / USER: This instruction manual contains important
information necessary for the proper assembly and safe use of the appliance.
Read and follow all warnings and instructions before assembling and using
the appliance. Follow all warnings and instructions when using the appliance.
Keep this manual for future reference.
50003XXX 05/06 Rev.1 Sp
Assembly and
Owner’s Manual
Stainless Steel
Gas Smoker
VC3624GS
DANGER DANGER

Vermont Castings Signature VC3624GS Specifications

General

Brand	Vermont Castings
Model	Signature VC3624GS
Category	Smoke Alarm
Language	English

Summary

Introduction and Safety Warnings

Gas Leak Safety

Essential steps to follow immediately if a gas leak is detected.

General Safety Precautions

Key warnings for safe operation, including unattended use and proximity hazards.

Comprehensive Safety Warnings

Prohibited Usage and Locations

Defines unsafe uses, locations, and conditions for the smoker.

Safe Handling and Movement

Clearance and Fire Prevention

Mandatory clearances from combustibles and flammable liquids.

LP Gas Cylinder Safety

Critical rules for storing, connecting, and handling LP gas cylinders.

Assembly Step 2: Attaching Legs

Leg Installation Procedure

Detailed steps for attaching the smoker's legs, including special leg placement.

Assembly Step 4: Attaching Burner Chamber

Burner Chamber and Valve Seating

Procedure for installing the burner chamber and ensuring proper burner valve connection.

Assembly Step 9: Final Connections

Hose Securing and Regulator Storage

How to secure the gas hose and use the S-hook for the regulator when disconnected.

Ignitor Battery Installation

Connecting the LP Tank

LP Tank Connection Steps

Step-by-step guide for safely connecting the LP tank to the smoker.

LP Cylinder Safety and Specifications

Critical warnings and requirements for LP cylinders and their use.

LP Tank Connection and Leak Check

Leak Detection Procedure

Method for checking all gas connections for leaks using a soap solution.

Hose and Tank Placement

Lighting the Smoker

Electronic Ignitor Lighting

Procedure for starting the smoker using the built-in electronic ignitor.

Match Lighting Method