Verona VPFSGE365D Series User Manual

DOUBLE OVEN DUAL FUEL RANGE
Models: VPFSGE365D ..
INSTALLATION INSTRUCTIONS
IMPORTANT - PLEASE READ AND FOLLOW
• Before beginning, please read these instructions completely and carefully.
• Do not remove permanently affixed labels, warnings, or plates from the product. This may
void the warranty.
• Please observe all local and national codes and ordinances.
• Please ensure that this product is properly grounded.
• The installer should leave these instructions with the consumer who should retain
for local inspector’s use and for future reference.
Installation must conform with local codes or in the absence of codes, the National Fuel Gas
Code ANSI Z223.1/NFPA 54 - Iatest edition. Electrical installation must be in accordance
with the National Electrical Code, ANSI/NFPA70 - latest edition and/or local codes. IN
CANADA: Installation must be in accordance with the current CAN/CGA-B149.1 National
Gas Installation Code or CAN/CGA-B149.2, Propane Installation Code and/or local codes.
Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical
Codes Part 1 and/or local codes.
INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform with
the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [formerly
the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part 280)]
or, when such standard is not applicable, the Standard for Manufactured Home Installations,
ANSI/NCSBCS A225.1, or with local codes where applicable.
INSTALLATION IN RECREATIONAL PARK TRAILERS: The installation must conform with
state or other codes or, in the absence of such codes, with the Standard for Recreational
Park Trailers, ANSI A119.5.
Installation of any gas-fired equipment should be made by a Iicensed plumber. A manual
shut-off valve must be installed in an accessible location in the gas line external to the
appliance for the purpose of turning on or shutting off gas to the appliance (In Massachusetts
such shutoff devices should be approved by the Board of State Examiners of Plumbers &
Gas Fitters).
If an external electrical source is utilized, the appliance, when installed, must be electrically
grounded in accordance with local codes or, in the absence of local codes, with the national
Electrical Code, ANSI/NFPA 70.
R
FOR INSTALLER ONLY
THIS RANGE IS FOR RESIDENTIAL USE ONLY
Some models are supplied with a protective lm on steel and aluminium
parts. This lm must be removed before installing/using the appliance.

Verona VPFSGE365D Series Specifications

General

Type	Freestanding
Number of Burners	5
Oven Capacity	5.0 cu. ft.
Oven Type	Convection
Fuel Type	Gas
Finish	Stainless Steel
Width	36 inches
Ignition Type	Electronic
Color	Stainless Steel
Oven Cooking Modes	Bake, Broil, Convection Bake
Dimensions (WxDxH)	36 x 25.25 x 37.25 inches

Summary

INSTALLATION INSTRUCTIONS

Important - Please Read and Follow

Key safety and procedural guidelines before starting installation.

Tip-Over Hazard Warning

Critical safety warning about the risk of range tipping and how to prevent it.

General Safety Precautions

Important safety precautions to prevent fire, explosion, and carbon monoxide poisoning.

Chemical Exposure Warning

Warning about potential exposure to chemicals like formaldehyde and lead.

Domestic Use Disclaimer

States the appliance is for domestic use only and warranty void if used otherwise.

Tools Needed for Installation

Lists essential tools required for the installation process.

Proximity to Side Cabinets

Specifies clearance requirements for installing the range next to cabinets.

Cabinet Proximity with 8" Backguard

Clearance requirements for side cabinets when using an 8-inch backguard.

Cabinet Proximity with 2" or 3" Backguard

Clearance requirements for side cabinets when using a 2 or 3-inch backguard.

Adjustable Feet and Levelling

Instructions on fitting adjustable feet and levelling the appliance.

Moving the Cooker

Safe procedures for moving and positioning the appliance.

Assembling the Backguard

Steps for assembling and installing the backguard.

Installing the Anti-Tip Bracket

Detailed instructions for installing the anti-tip bracket to prevent tipping.

Installing Cooktop Front Guard

Procedure for installing the cooktop front guard, noting it requires cooktop removal.

GENERAL INFORMATION

Electrical Grounding Instructions

Instructions for proper electrical grounding to ensure safety.

Replacement Parts

Information on using only authorized replacement parts for service.

GAS CONNECTION

Manual Shut-off Valve

Requirement and placement guidelines for the manual gas shut-off valve.

Pressure Regulator Installation

Instructions for installing the pressure regulator for safe gas operation.

Test Point Adapter

Information on the availability of the Test Point adapter.

Flexible Gas Connections

Recommendations for using flexible connectors for gas supply.

Rigid Pipe Gas Connections

Guidelines for making rigid pipe connections to the gas supply.

Leak Testing

Procedure for testing gas connections for leaks after installation.

Gas Conversion

Procedure for converting the appliance for different gas types.

Setting the Pressure Regulator

Instructions on how to set the pressure regulator for different gas types.

Injector Table and Substitution

Table of injector sizes for different gas types and instructions for substitution.

Setting the Burner Minimum Flame

Procedure to adjust the minimum gas flow rate for burners.

ELECTRICAL CONNECTION

Electrical Requirements

Essential electrical requirements for installation, including grounding and codes.

Connection with Power Cord

Steps for connecting the appliance using a power cord kit.

Connection with Conduit

Steps for connecting the appliance using electrical conduit.

3-Wire Power Cord Installation

Detailed steps for installing a 3-wire power cord.

4-Wire Power Cord Installation

Detailed steps for installing a 4-wire power cord.

3-Wire Conduit Installation

Steps for connecting using a 3-wire conduit.

4-Wire Conduit Installation

Steps for connecting using a 4-wire conduit.

Wiring Diagram and Key

Electrical wiring diagram and key for understanding circuit components.