Versa-Matic E3 - EC;EU Declaration of Conformity

Date of Issue: 10 May 2014
Technical File No.: 203104000-1410/MER
Quality System Registration No: ISO 9001-2000
Conforming Apparatus: Air-Operated Metal
Double Diaphragm Pumps for Use In Potentially
Explosive Atmospheres
Hazardous Location Applied: Elima-Matic metallic pumps
1. I M2 c
2. II 2G c T5
3. II 2D c T100°C
Elima-Matic non-metallic pumps
4. II 2G c T6
5. II 2D c T85°C
Manufacturer: Warren Rupp, Inc., A Unit of IDEX Corporation
800 North Main Street, P.O. Box 1568
 Manseld,OH44901-1568
USA.
OnFileWith: DEKRACerticationB.V.(0344)
Meander 1051
6825 MJ Arnhem
The Netherlands
Harmonized Standards Applied: EN 13463-1:2009 Non-Electrical Equipment
Potentially Explosive Atmospheres-Part 1 Basic
Methods and Requirements
EN 13463-5:2011 Non-Electrical Equipment for
Potentially Explosive Atmospheres-Part 5
Protection by Constructional Safety
Equipment: 1. Elima-Matic Series metal pumps
2. Elima-Matic Series non-metallic pumps
We hereby certify that the equipment described above conforms with the protection requirements of Council Directive
94/9/ECof23March1994AnnexVIIIontheapproximationofthelawsoftheMemberStatesConcerningEquipment
and Protective Systems Intended for use in Potentially Explosive Atmospheres
DATE/OFREVISION/TITLE: DaveRoseberry
07 April 2016 Director of Engineering
EC / EU DECLARATION OF CONFORMITY
The objective of the declaration described is in conformity with the relevant Union harmonisation legislation:
Directive94/9/EC(untilApril19,2016)andDirective2014/34/EU(fromApril20,2016).
VM_DofC_ATEX_MetallicAndNon-Metallic_V_rev0416