Versalift TEL-29-N User Manual

Operator’s Manual
Time Manufacturing Co. 7601 Imperial Drive P.O. Box 20368 Waco, Texas 76702 Phone: 254-399-2100 Fax: 254-751-0775
Aerial Device
ATTENTION:
THIS MANUAL CONTAINS CONFIDENTIAL INFORMATION
AND IS THE SOLE PROPERTY OF TIME MANUFACTURING CO.
CONTENTS ARE NOT TO BE DISCLOSED, COPIED, OR REPRODUCED
IN ANY MANNER WITHOUT THE EXPRESSED, WRITTEN PERMISSION
OF TIME MANUFACTURING CO.
DO NOT ATTEMPT TO OPERATE THIS VERSALIFT UNTIL
YOU HAVE READ AND UNDERSTOOD ALL INFORMATION IN BOTH
OPERATOR’S AND SERVICE MANUALS, PROVIDED WITH EACH
VERSALIFT.
MANUAL PART NUMBER
22011-12
SERIAL NUMBER
TEL-29-N/NE
Time Manufacturing Co. reserves the right to improve the design or change specifi cations at any time without notice.
02/19
PLEASE NOTE THE ANSI A92.2 STANDARD AND THE MANUAL OF RESPONSIBILITIES CONTAINS
RECENTLY UPDATED INFORMATION. DEALERS, OWNERS, USERS, OPERATORS, LESSORS AND LESSEES MUST
ADHERE TO THESE UPDATED STANDARDS.

Versalift TEL-29-N Specifications

General

Brand	Versalift
Model	TEL-29-N
Category	Trucks
Language	English

Summary

Responsibilities and Safety

Operator Responsibilities

Safety and Decals

Safety Warnings and Hazards

Fall and Electrocution Hazards

Warns about severe risks from falling and contact with electrical power lines, requiring safety precautions.

Operation Safety Precautions

Electrical Safety and Load Limits

Additional Safety Considerations

General Safety Guidelines

TEL-29-N Dimensional Data

TEL-29-N Dimensions and Reach

TEL-29-NE Dimensional Data

TEL-29-NE Dimensions and Reach

Vehicle Integration Specifications

Chassis Mounting and Stability

Aerial Lift Operation

Positioning and Setup

Operating Procedures

Startup and Basic Operations

Platform and Electrical Safety

Platform Controls and Electrical Hazards

Details platform locking mechanisms, upper controls, and critical safety measures when operating near electrical hazards.

Control Station Operation

Cab and Lower Controls

Describes the functionality and operation of the cab and lower control stations for managing the aerial lift.

Advanced Operation Features

Upper Control and Leveling

Upper Controls and Leveling Function

Explains the operation of the upper control panel, engine start/stop, and the hydraulic platform leveling feature.

Emergency Operation

Emergency Response Protocols

Outlines essential protocols for emergency situations like operator injury or hydraulic system malfunctions, prioritizing personnel safety.

Emergency Failure Handling

Response to System Failures

Details emergency responses for common failures including truck gear, engine, hydraulic lines, and control valves.

Hydraulic Hazards and Post-Emergency

Hydraulic Leaks and Aftermath

Daily Visual Inspection

Inspection Guide and Components

Explains the importance of daily visual inspections and lists critical components to check for safe operation.

Inspection Checklist Details

Specific Inspection Points

Provides detailed checks for leveling systems, decals, platforms, safety devices, and covers.

Critical Fasteners and Welds

Fastener and Weld Inspection