Versalift VO-460-MHI User Manual

Operator’s Manual
Time Manufacturing Co. 7601 Imperial Drive P.O. Box 20368 Waco, Texas 76702 Phone: 254-399-2100 Fax: 254-751-0775
Aerial Device
ATTENTION:
THIS MANUAL CONTAINS CONFIDENTIAL INFORMATION
AND IS THE SOLE PROPERTY OF TIME MANUFACTURING CO.
CONTENTS ARE NOT TO BE DISCLOSED, COPIED, OR REPRODUCED
IN ANY MANNER WITHOUT THE EXPRESSED, WRITTEN PERMISSION
OF TIME MANUFACTURING CO.
DO NOT ATTEMPT TO OPERATE THIS VERSALIFT UNTIL
YOU HAVE READ AND UNDERSTOOD ALL INFORMATION IN BOTH
OPERATOR’S AND SERVICE MANUALS, PROVIDED WITH EACH
VERSALIFT.
MANUAL PART NUMBER
39049-01
SERIAL NUMBER
VO-452/455/460-MHI
Time Manufacturing Co. reserves the right to improve the design or change specifications at any time without notice.
01/17
PLEASE NOTE THE ANSI A92.2 STANDARD AND THE MANUAL OF RESPONSIBILITIES CONTAINS RECENTLY
UPDATED INFORMATION. DEALERS, OWNERS, USERS, OPERATORS, LESSORS AND LESSEES MUST ADHERE TO
THESE UPDATED STANDARDS.

Versalift VO-460-MHI Specifications

General

Brand	Versalift
Model	VO-460-MHI
Category	Boom Lifts
Language	English

Summary

Responsibilities and Safety

Safety

Covers operator qualifications, risks, and general safety practices for aerial lifts.

Think Safety

Insulated vs. Non-Insulated Sections

Defines and illustrates which parts of the aerial device are insulated and not.

Dimensional and Vehicle Specifications

Dimensional Specifications

Vehicle Specifications

Operation

Positioning the Versalift for Operation

Guidance on truck placement, setup, and outrigger engagement.

Aerial Lift Operations

General operating practices, startup procedures, and safety during aerial lift use.

Cab and Ground Control Operations

Lower Control and Hydraulic Tool Operations

Upper Control Operations

Details how to identify and operate controls from the platform.

Storing the Aerial Lift

Procedures for securing the lift for road travel and storage.

Lifting Eye and Material Handling

Emergency Operation

Control Selector and Bleeder Ports

Manual Rotation and Backup Pump

Handling Operator Incapacitation and Line Failures

Procedures for rescuing operators and responding to hydraulic line failures.

Control Valve and Engine Failure

Actions for control valve failure and emergency procedures during engine failure.

Daily Visual Inspection

Inspection of Structural Components

Checking bolts, fasteners, welds, hydraulic lines, and oil leaks for integrity.

Electrical System, Tires, and Loose Objects