Versalift VST-47-I User Manual

Operator’s Manual
Time Manufacturing Co. 7601 Imperial Drive P.O. Box 20368 Waco, Texas 76702 Phone: 254-399-2100 Fax: 254-751-0775
Aerial Device
ATTENTION:
THIS MANUAL CONTAINS CONFIDENTIAL INFORMATION
AND IS THE SOLE PROPERTY OF TIME MANUFACTURING CO.
CONTENTS ARE NOT TO BE DISCLOSED, COPIED, OR REPRODUCED
IN ANY MANNER WITHOUT THE EXPRESSED, WRITTEN PERMISSION
OF TIME MANUFACTURING CO.
DO NOT ATTEMPT TO OPERATE THIS VERSALIFT UNTIL
YOU HAVE READ AND UNDERSTOOD ALL INFORMATION IN BOTH
OPERATOR’S AND SERVICE MANUALS, PROVIDED WITH EACH
VERSALIFT.
MANUAL PART NUMBER
39014-03
SERIAL NUMBER
VST-36/40/47/52-I
Time Manufacturing Co. reserves the right to improve the design or change specifications at any time without notice.
06/16
PLEASE NOTE THE ANSI A92.2 STANDARD AND THE MANUAL OF RESPONSIBILITIES CONTAINS RECENTLY
UPDATED INFORMATION. DEALERS, OWNERS, USERS, OPERATORS, LESSORS AND LESSEES MUST ADHERE TO
THESE UPDATED STANDARDS.

Versalift VST-47-I Specifications

General

Power Source	Hydraulic
Max Working Height	52 ft
Max Platform Height	47 ft
Max Horizontal Reach	31.5 ft (9.60 m)
Platform Capacity	500 lb (226.8 kg)
Outreach	31.5 ft (9.6 m)
Platform Height	47 ft
Horizontal Reach	31.5 ft (9.6 m)
Platform Size	24 in x 48 in
Rotation	Continuous

Summary

Responsibilities / Safety

Responsibilities of Dealers, Owners, Users, Operators, Lessors and Lessees

Details user obligations as per ANSI/SIA A92.2 standard for safe use and operation.

Safety

What Is Insulated and What Is Not Insulated

Operation

Positioning the Versalift for Operation

Guidelines for stable and effective setup of the aerial device.

Responsibilities Before Leaving the Truck Cab

Operating Where Electrical Hazards Are Present

Critical safety procedures when working near electrical hazards.

Cab Control Operation

Ground Control Operation

Lower Control Operation

Upper Control Operation

Storing the Aerial Lift

Jib Capacity Determination

Emergency Operation

Control Selector (Platform Override)

How to transfer control to the lower station during emergencies.

Bleeder Ports

Using bleeder ports to lower booms in emergencies.

Manual Rotation

Injured or Incapacitated Operator

Hydraulic Line Failure

Procedures for responding to hydraulic leaks and failures.

Daily Visual Inspection

Oil Leaks

Daily Visual Maintenance and Inspection Checklist

Critical Fasteners

Critical Welds