Need help?Do you have a question about the VersaLogic VL-586-1 and is the answer not in the manual?
General| Operating Temperature | -40°C to +85°C |
|---|---|
| Power Input | 5V DC |
| Storage | SATA III |
| I/O Ports | Multiple USB, Serial, Ethernet |
| Ethernet | Gigabit Ethernet |
| USB | USB 3.0, USB 2.0 |
| Serial Ports | RS-232/422/485 |
| Video Output | VGA |
| Expansion | Mini PCIe |
| Dimensions | 146mm x 101.6mm |
| Power Supply | 5V DC input |
Details on DRAM, SRAM, and Flash memory configurations.
Overview of storage interfaces for hard and floppy drives.
Description of the on-board serial ports (COM1, COM2).
Details on the parallel port's functionality and I/O signals.
Information on the on-board counter/timer hardware.
Functionality of the real-time clock and CMOS RAM.
Description of the on-board interrupt controllers.
Information on the Direct Memory Access controllers.
Description of the system's watchdog timer.
Details the electrical power consumption of the CPU card.
Electrical characteristics of the parallel port.
Configuration and modes for COM1 and COM2 serial ports.
Specifications for the floppy disk drive controller.
Specifications for the IDE hard disk drive controller.
Details on supported memory types and socket configurations.
Specifications for RAM and Flash memory speeds.
Details on supported bus standards like STD and PC/104.
Steps required to obtain service for the product.
Details regarding warranty service coverage and costs.
Information on out-of-warranty repair services and costs.
An overview of the functions of various hardware jumpers.
Visual diagrams showing the placement of jumper blocks.
Details of the 64K I/O address space map.
Jumper configurations for bus mastering modes.
Jumpers used for routing interrupt sources.
Control register for I/O and memory mapping.
Register for map and paging control.
To Next Page