Vertex™ Omega 180 i / Instruction Manual © Vertex Aquaristik ™GmbH, Deutschland 2014
Vertex™ Omega 180 i Protein Skimmer
Thank you for your purchase of the Vertex™ Omega 180 i protein skimmer. Please be sure to read and follow this
brief guide to ensure proper install and operation of your device.
In the box:
I) Omega 180 i Skimmer assembled with Syncra V-180
1- Body
2- Custom Sicce Syncra V-180
3- Venturi, Intake Nozzle and Pump-Head
4- Silicone Air-line Tubing
5- PE Ozone Tubing
6- Pump to Venturi Coupler
II) 10mm Drain Outlet coupler
III) Sicce™ Syncra Owner’s Manual
IV) Omega 180 Owner’s manual
Important Safety Warnings:
This is an electrical device operated in close proximity to water be cautious, follow instructions and use
common sense.
Do not touch the plug or the electrical outlets with wet hands. Always dry your hands first.
Omega 180 i and its Pump are solid heavy objects, impact can cause bodily harm, loss of life and/ or
damage to property.
Do not attempt to Service the unit while in operation or connected to Electricity.
Unless you are qualified; service only by authorized professionals.
Do not attempt to alter the product. Do not attempt to alter the Motor-Block or the Impeller Assembly.
Do not touch the impeller and/ or attempt to turn the Impeller when the unit is connected to power.
Ensure the product is free of defect and properly assembled before connecting to power.
Drip-Loop is required where the power cable is connected to the outlet.
Do not carry, lift or hold the pump or the skimmer by its cable.
Always think safety first! If you are unsure as how to operate this product; consult with a professional
or contact us directly.
To Next Page
Need help?
General