Vertiv Avocent ACS6000 Command Reference Guide

FIELD DESCRIPTION
For Appliance
Name Name assigned to the appliance (for example, ACS6048-1357908642)
Port N/A
Type N/A
Status N/A
For SerialPort
Name Either the default name [XX-XX-XX-p-n (where n=port_number)], an administrator-assigned alias or an auto-discovered server name
Port Number of the serial port
Type Serial
Status Idle / In-Use
For Power
Name PDU ID (either the default name in the format XX-XX-XXPXX_n or an administrator-assigned alias, such as myPDU)
Port Number of the serial port/position on the chain
Type PDU model
Status Number of Outlets ON | Total outlets
For
Outlets
Enter cd <PDU_ID>/outlets and enter show to see list of outlets and the actions that can be taken (commands that can be executed) for
each outlet as shown below.
Name Either the default XX-XX-XXPXX_n_n or an administrator-assigned name
Port PDU outlet number
Type Outlet
Status ON / OFF
Action None
Table 3.2 Access Parameters
To view information about the console server and connected devices:
1. Log into the CLI and enter cd access to change to the Access level.
--:- / cli-> cd access
2. Enter show. Information about the console server and the ports the current user is authorized
to access appears.
--:- access cli-> show
Name Port Type Status
=====================================
ACS6016-0011223344
21-67-72-p-1 1 serial in-use
21-67-72-p-2 2 serial idle
21-67-72-p-4 4 serial idle
myPDU 3|1 PM8|15A 8|8
Type ls to see available sub-nodes
--:- access cli->ls
ACS6016-0011223344/
21-67-72-p-1/
21-67-72-p-2/
21-67-72-p-4/
Vertiv | Avocent® ACS6000 Advanced Console Server Command Reference Guide | 22

Vertiv Avocent ACS6000 Specifications

General

Brand	Vertiv
Model	Avocent ACS6000
Category	Server
Language	English