Vertiv Liebert CRV CCD10 User Manual

Vertiv | Liebert CRV CCD10 Condenser | User Manual
Liebert® CRV Condenser
CCD10 Condenser User Manual

Vertiv Liebert CRV CCD10 Specifications

General

Brand	Vertiv
Model	Liebert CRV CCD10
Category	Accessories
Language	English

Summary

Suppliers Declaration of Conformity

FCC Compliance Statement

Details the device's compliance with FCC Part 15 rules for electromagnetic interference.

Version History

Electrical Safety and Shock Hazards

Arc Flash and Electric Shock Warnings

Crucial warnings about arc flash, electric shock, and proper power disconnection.

Refrigeration System Pressure Hazards

Addresses risks of over-pressurization and explosive discharge of refrigerants.

Handling and Electrical Safety Precautions

Safe Moving, Lifting, and Wiring

Warnings about safe moving, lifting, and secure electrical connections to prevent hazards.

Component Temperature and Refrigerant Line Safety

Cautions regarding hot/cold surfaces and excessive refrigerant line pressure.

Operational and Maintenance Notices

Maintenance and Environmental Disposal Notices

Notices on proper maintenance, hazardous substance disposal, and environmental protection.

Power Supply and Operational Precautions

Notices regarding correct power supply connection and operational safety.

Storage and Interference Precautions

Storage and Interference Precautions

Notes on control malfunction, interference, and proper storage to ensure correct operation.

Chapter 1: Overview

Naming Rules

Explains the nomenclature for Liebert CRV and CCD10 condenser unit models.

Main Components of Standard Condenser

Describes the primary parts of the condenser, focusing on the fan and heat exchanger.

Introduction of Low Ambient Kit

Details the Low Ambient Kit, its function, and key components for low-temperature operation.

Technical Parameters

Presents mechanical parameters and dimensions of the condenser units.

Operating Environment Parameters

Specifies ambient temperature, humidity, and altitude limits for operation.

Storage Environment Parameters

Outlines recommended ambient conditions for storing the condenser.

Chapter 2: Mechanical Installation

Moving, Unpacking, and Inspection

Covers safe procedures for receiving, unpacking, and inspecting the unit upon arrival.

Installation Notes

Provides critical guidelines for selecting the installation site and preparing for installation.

Space Requirements

Defines necessary clearances for vertical and horizontal airflow installations.

Installation Procedures

Step-by-step instructions for installing the Low Ambient Kit, pipelines, and wiring.

Charging Refrigerant and Adding Cooling Oil

Essential steps for filling the system with refrigerant and cooling oil.

Chapter 3: Maintenance and Troubleshooting

Maintenance Procedures

Details regular maintenance for refrigeration system, heat exchanger, and fan.

Troubleshooting Common Faults

Offers methods to diagnose and resolve issues like start-up failures and high-pressure alarms.

Appendix I: Hazardous Substances or Element Announcement