Need help?Do you have a question about the Vertiv Liebert DSE500 and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Input Voltage | 400V/480V, 3-phase, 50/60 Hz |
| Output Voltage | 400V/480V, 3-phase, 50/60 Hz |
| Humidity | 20-80% non-condensing |
| Dimensions (HxWxD) | Varies by configuration |
| Weight | Varies by configuration |
Details the model number configuration and component locations.
Illustrates the perimeter-unit airflow configuration and duct connections.
Details unit and anchor dimensions for planning.
Covers electrical connections and evaporator drip-pan setup.
Defines operating envelope and lists unit weights.
Provides instructions and warnings for safely rigging and lifting the unit.
Covers moving, placing, electrical, and other installation checks.
Verifies installation and wiring of network cables, sensors, and BMS.
Details service access, safety, and filter replacement procedures.
Guidance on evaporator fan maintenance, troubleshooting, and removal.
Covers EEV function, compressor oil, Rotalock valve, and replacement.
Importance of condenser coil cleanliness and airflow for efficiency.
Procedures for replacing condenser fans and the control board.
Refers to a separate guide for maintenance and operation of PRE systems.
To Next Page
