Need help?Do you have a question about the Vertiv Liebert IntelliSlot Unity Card and is the answer not in the manual?
General| Category | Adapter |
|---|---|
| Device Type | Network adapter |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet |
| Compatibility | Vertiv Liebert UPS systems |
| Function | Remote monitoring and control |
| Communication Protocols | SNMP |
| Network Interface | Ethernet |
| Power Supply | From UPS |
| Dimensions | Varies by model |
| Form Factor | Plug-in card |
| Features | Environmental monitoring |
| Compliant Standards | RoHS |
| Encryption Algorithm | SSL, TLS |
| Ports | 1 x RJ-45 Ethernet |
Details on the Unity card's monitoring capabilities for Liebert SN modular and integrated sensors.
Physical installation steps for the Unity card into the Liebert equipment bay.
How to establish a direct Ethernet connection for initial card configuration.
Procedures for determining DHCP IP or assigning a static IP address.
Steps to connect the RS-485 serial cable for communication to a BMS.
Instructions to immediately change default user credentials for enhanced security.
Initial steps to enable basic network connectivity and configure the card's IP settings.
Overview of security settings to reduce unauthorized access risks.
Detailed steps for enabling and configuring the Modbus communication protocol.
Detailed steps for enabling and configuring the BACnet communication protocol.
Detailed steps for enabling and configuring the SNMP communication protocol.
How to download data mapping files for enabled communication protocols.
Requirements for configuring the Cloud Client on an un-initialized Unity card.
Steps to register the unit with the cloud service for mobile app access.
Overview of the main panels and areas of the Unity card's web interface.
Explains web UI tabs (Managed Device, Comm, Sensor) and help features.
Lists the folders available within the Communications tab for configuration.
Access to system, user, network, and other core configuration settings.
Configuration options for various communication protocols like BACnet, Modbus, SNMP.
Options for restarting, resetting to factory defaults, and updating firmware.
To Next Page