Need help?Do you have a question about the Vertiv Liebert LSF85-R3 and is the answer not in the manual?
Details the classification and different models of the Liebert condenser, including R22/R407C and R410A systems.
Explains the model naming convention and breakdown for Liebert condensers using an example.
Identifies and illustrates the primary components of the Liebert condenser unit, such as fans and control boxes.
Provides essential technical specifications and data for the condenser models.
Lists the mechanical specifications including weight, fan diameter, and dimensions (L, H, W).
Specifies mounting base dimensions for both horizontal and vertical installation configurations.
Outlines the required ambient temperature, humidity, altitude, and protection levels for operation.
Specifies the required ambient temperature, humidity, and storage time for the condenser.
Provides instructions for safely moving, unpacking, and inspecting the condenser upon arrival.
Key guidelines and precautions for installing the condenser, focusing on airflow and location.
Details the necessary clearances around the air outlet and service spaces for installation.
Step-by-step guide for installing the condenser, including piping, power connection, and charging.
Details the function and pin definitions of the fan speed controller's AC I/O, sensor, and communication terminals.
Introduces the Human-Machine Interface (HMI) components: indicators, RS485 port, keys, and LCD.
Explains the HMI operation, including initial display, main menu navigation, and alarm/data querying.
Provides guidance on routine maintenance for refrigeration system, heat exchanger, fan, and fan speed controller.
Lists common alarms (A00-A09), their causes, and recommended troubleshooting steps.
To Next Page
General