2 Using the Battery Stand
en
Using the Battery Stand
Attaching the detachable base to the
Battery Stand
1. Look for a threaded hole in the bottom of the
Battery Stand.
2. Screw the base to the Battery Stand until they are
snugly joined.
The Battery Stand can fully rotate and tilt
forward/backward when attached to the base.
3. Screw the Suction Mount to the Battery Stand if
you want to put it on the windscreen or window.
Charging the Battery Stand
1. Connect the supplied power adapter to a mains
power socket and insert the plug into the micro
USB socket at the back of the Battery Stand.
2. The battery level indicators (3 LEDs) will light up
progressively when charging.
3. All the 3 LEDs will light up when it is fully-
charged.
To Next Page
Loading...