Using the Battery Stand 3
en
Charging the VerveCam
1. Connect VerveCam to the Battery Stand and
lock it securely.
2. Connect the supplied power adapter to mains
power socket and insert the plug into the micro
USB socket at the back of the Battery Stand.
3. VerveCam and the Battery Stand will be
charged at the same time.
4. All the 3 battery level indicators will light up
when VerveCam is fully-charged (if the Battery
Stand is connected to a mains power socket).
Checking battery level on the Battery
Stand
1. Press the battery level button once.
2. The battery level indicators (3 LEDs) will light up,
where 1 LED = LOW, 2 LEDs = MEDIUM, 3 LEDs
= HIGH).
3. The battery level indicators will flash 3 times if
the Battery Stand is not connected to a mains
power socket.
To Next Page
Loading...