4 Suction Mount
en
Suction Mount
The suction mount supports 360 degree tilt, turn
and rotation. It comes with a strong suction cup
that will adhere to most smooth flat surfaces, and
is compatible with most digital cameras that have
a standard 1/4" tripod screw mount.
1. Attach your VerveCam to its universal tripod
mount.
2. Screw the universal tripod mount to the
suction mount and stick the suction cup to a
smooth surface.
3. To get extra suction, press down the lever on
the suction mount to lock it in place.
To remove, pull up the lever to release and
then use the tab to break the suction.
To Next Page
Loading...