This document describes the ID115Plus HR Fitness Tracker, a wearable device designed for recreational activity tracking and health monitoring.
Function Description
The ID115Plus HR Fitness Tracker primarily functions as an activity tracker, monitoring various metrics such as steps, sleep, distance, heart rate, and calories. It connects to a smartphone via Bluetooth 4.0 and uses the "VeryFitPro" APP for data synchronization, settings customization, and advanced features.
Key functions include:
- Main Screen: Displays time and steps (screensaver) or a customizable main screen with time and date. Users can customize the main screen through the "Dial set" option in the APP.
- Step Mode: Tracks steps taken. A long press on the touch key for 2 seconds allows viewing detailed step data, and single taps flip through different step data. The device can vibrate and display a notification when a user's sports target (set in the APP) is reached.
- Heart Rate Mode: Automatically monitors heart rate after entering the interface for 1 second. It displays "---" before correct data is detected and then shows specific heart rate data in BPM.
- Alarm Mode: Displays alarm times set in the "Alarm alert" section of the APP. Users can long-press the touch key for 2 seconds to turn the alarm function on/off directly from the device. Various alarm types (Get up, Go to sleep, Exercise, Medication, Dating, Party, Meeting) can be set in the APP.
- Sports Modes (Walk, Run, Bike): The device supports tracking specific exercise modes. "Walk Mode," "Run Mode," and "Bike Mode" are displayed by default. Users can select up to 3 different sports modes from a total of 14 available in the "Activity display" settings within the "VeryFitPro" APP. During exercise, tapping the touch key flips through exercise data such as BPM, steps, KCAL, miles, pace, average pace, and time. A long press for 2 seconds quits the exercise mode, and a summary of the exercise data is displayed. Data for exercises less than 1 minute will not be saved.
- Call Alert: Notifies users of incoming calls by displaying the contact name (if in the contact list) or stranger number. Users can long-press the touch key to reject the call or single-tap to return to the main screen. This function is active only when "Call Alert" is enabled in the APP.
- SNS Alert: Displays content of incoming SNS messages (including SMS, Facebook, WhatsApp, Twitter, Instagram, Facebook Messenger, LinkedIn, Email, Mail, and Calendar). This feature requires "SNS Alert" to be enabled and "Allow notification" to be granted in the APP. Messages are not notified if the "Do not disturb" function is enabled in the APP.
- Take Photos: Allows users to control their smartphone camera remotely. After tapping "Take Photo" in the "VeryFitPro" APP, the device screen shows a camera interface, and a single tap on the touch key triggers a photo capture.
- Sedentary Alert: Reminds users to move after a set sedentary alert period. This function is activated and configured in the "Sedentary Alert" section of the "VeryFitPro" APP.
- Device Error Notification: Displays status codes on the screen if an exception occurs when the device is turned on. Codes indicate abnormalities such as acceleration sensor (-01), heart rate sensor (-02), touch IC (-03), or flash (-04).
Important Technical Specifications
- Model No.: ID115Plus HR
- Battery Capacity: 65mAh
- Working Voltage: 3.7V
- Host Weight: About 22.5g
- Sync: Bluetooth 4.0
- Working Temperature: -10°C ~ 45°C
- Waterproof Rating: IP67
- Working Time: 5 days (with Automatic HR Monitoring ON), 8 days (with Automatic HR Monitoring OFF).
- USB Charger Requirement: DC USB port (5V-500mA)
- Charging Time: 1-2 hours
- Smartphone System Requirement:
- iOS 7.1 & above
- Android 4.4 & above
- Bluetooth 4.0 & above
- Compliance: Meets EU ROHS standards (Refer to IEC 62321 and EU RoHS Directive 2011/65 / EU and its revision instructions).
Usage Features
- Charging: The device features a USB charging plug integrated into the host. It should be inserted into a USB port, ensuring the pins make contact. A red indicator light confirms proper charging and turns off when fully charged. The device requires at least 10 minutes of charging to activate before initial use. It will automatically boot up once fully charged.
- Installation and Wearing: The host plugs into slots on each strap. The device should be worn horizontally on the wrist, approximately 2cm from the carpal, similar to a watch.
- APP Download and Pairing: The "VeryFitPro" APP can be downloaded from the APP store or Google Play, or by scanning a provided QR code. To pair, Bluetooth must be enabled on the smartphone, and the APP opened to "Device" → "Bind device." The smartphone will search for devices, and "ID115Plus HR" should be selected from the list. If searching fails, tapping the touch key to wake the device may help. The device can only link to one smartphone at a time.
- Touch Key Operation: The device has a non-touch screen and relies on a single touch key for navigation. Single taps typically move to the next mode or flip through data, while long presses activate or deactivate functions within a mode.
- Waking Screen: The display is off when not in use. It can be woken by turning the wrist towards the user (displaying time and steps as a screensaver, then a single tap to the main screen) or by a single tap on the touch key (displaying the main screen directly).
- Abnormal Situations During Exercise:
- Inactive Exit Prompt: The device will automatically exit sport mode if no action is taken for 15 minutes. It will be forced to exit if the waiting prompt is not tapped within 15 seconds. Tapping the touch key cancels this prompt.
- Memory Full Exit Prompt: If memory is full during sport mode (which lasts up to 6 hours), the device will prompt and force an exit, displaying exercise data.
- Low Battery Exit Prompt: If the battery is low during sport mode, the device will prompt and force an exit, displaying exercise data.
- Disconnected State: If the APP and device disconnect during exercise, a waiting prompt appears. Tapping the touch key exits this prompt.
- Troubleshooting (FAQs):
- Failed to find device when pairing: Check smartphone Bluetooth, device distance (within 0.5m), "VeryFitPro" APP permissions (Location, Notifications), ensure tracker is unbound, and reboot smartphone/Bluetooth if necessary. For iOS, "Forget This Device" in Bluetooth settings may be required.
- Failed to charge: Verify USB plug direction, check for red indicator light, and remove device from power supply once fully charged to avoid shortening battery life.
- Failed to receive notifications: Ensure "VeryFitPro" APP has Location and Notification permissions, Bluetooth is on, and "Call/SNS Alert" functions are enabled in the APP.
- Failed to count steps accurately: The device uses a 3D sensor. Data may be delayed and resets if walking less than 40 continuous steps. Test accuracy by walking 100+ continuous steps.
- Failed to measure heart rate: Ensure the wristband fits neatly. Go to heart rate mode and wait 10-20 seconds for detection.
- Failed to connect to smartphone: Disconnection can occur if Bluetooth is off, out of range (within 10m, reduced by obstacles), or if the APP is closed in the background. To reconnect, check APP permissions, clear background processes, swipe down the Mainpage in the APP, or restart smartphone/Bluetooth and rebind.
- Failed to sync data: To sync, open "VeryFitPro" APP and swipe down the Mainpage while connected.
Maintenance Features
- Cleaning: Regularly clean the wrist and the fitness tracker, especially after sweating or exposure to substances like soap or detergent. Do NOT use household cleansers; use soapless detergent, rinse thoroughly, and wipe with a soft towel or napkin.
- Drying: If the bands get wet (e.g., after sweating or showering), clean and dry them thoroughly before putting them back on the wrist. Ensure skin is dry before wearing the bands.
- Skin Irritation: Avoid wearing the device too tightly. If skin irritation or discomfort occurs, discontinue use and consult a doctor. If sweating for more than two hours, clean and dry the band and wrist to prevent irritation. Give the wrist a break by removing the band for an hour after extended wear to prevent irritation from rubbing and pressure.
- General Care: Avoid exposing the device to extreme temperatures, open flames, liquids while charging, or sharp objects. Do not abuse, crush, open, repair, or disassemble the device, as this voids the warranty and can create safety hazards.
Need help?
General
To Next Page
