EasyManua.ls Logo

Vespa PRIMAVERA 125 User Manual

Vespa PRIMAVERA 125
75 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MANUALE STAZIONE DI SERVIZIO
1Q000905
Vespa Primavera 125 i.e. - 150 i.e. 3V ABS (i-
get 2016)

Other manuals for Vespa PRIMAVERA 125

Question and Answer IconNeed help?

Do you have a question about the Vespa PRIMAVERA 125 and is the answer not in the manual?

Vespa PRIMAVERA 125 Specifications

General IconGeneral
Displacement124.5 cc
Max Torque10.4 Nm at 6, 000 rpm
Cooling SystemForced air
Fuel SystemElectronic injection
Rear Brake140 mm drum
Front Tire110/70 - 12"
Rear Tire120/70 - 12"
Fuel Tank Capacity7 liters
Seat Height790 mm
Curb Weight130 kg
Length1, 870 mm
Width735 mm
Wheelbase1, 340 mm
Engine Typei-get, single cylinder, 4 strokes, 3 valves
Max Power7.9 kW at 7, 700 rpm
TransmissionCVT Automatic
Front SuspensionSingle arm with coil spring and hydraulic shock absorber
Rear SuspensionCoil spring with hydraulic shock absorber
Front Brake220 mm disc

Summary

Pre-delivery Checks and Procedures

Battery Safety and Handling

Instructions for battery charging, safety precautions, and handling.

Road Test Procedures

Steps for conducting a road test, including cold start and operations.

Technical Data and Specifications

General Rules and Safety

General rules, safety precautions for maintenance, and battery handling.

125 cm³ Engine Specifications

Technical details of the 125 cm³ engine.

150 cm³ Engine Specifications

Technical details of the 150 cm³ engine.

Frame Assembly Tightening Torques

Torque values for frame assembly components.

Crankcase Tightening Torques

Torque values for crankcase components.

Cylinder-Piston Assembly Clearances

Clearances for cylinder and piston assembly.

Piston Ring Assembly Clearances (125/150)

Assembly clearances for piston rings.

Cylinder Head Service

Procedures for cylinder head service and run-out check.

Valve Seat and Stem Diameter Checks

Procedures for checking valve seats and stem diameters.

Valve Oscillation and Guide Clearance

Checks for valve oscillation and clearance between guide and stem.

Valve Grinding and Camshaft Bearing Checks

Procedures for valve grinding and camshaft bearing inspection.

Tooling and Special Equipment

Steering and Bearing Tools

Tools for fitting steering seats, extracting bearings.

Diagnostic Tools and Cables

Diagnostic tool and EOBD cable for vehicle diagnostics.

Maintenance Procedures

Service Icon Behavior and Reset

Explains the service icon indicator and how to reset it.

Scheduled Maintenance Table and Intervals

Table outlining maintenance tasks at various km/month intervals.

Recommended Lubricants and Fluids

List of recommended Castrol products for maintenance.

Engine Oil Replacement and Filter Change

Steps for changing engine oil and filter.

Troubleshooting Guide

Engine Poor Performance Issues

Common causes and solutions for poor engine performance.

Starting Difficulties and Solutions

Troubleshooting common starting problems.

Excessive Oil Consumption and Smoke

Diagnosing and resolving oil consumption and exhaust smoke issues.

Related product manuals