VESSILS KAMADO - 13 Inch Grill Stand Style Assembly

VESSILS | 65 | VESSILS
STEP 1
Attach one bracket piece
(1)
to the
triangular plate
(2)
. Align the holes,
secure the connection by using 2x
screws
(D)
along with 2x dome-
headed nuts
(A)
, 2x spring washers
and 2x at washers.
Please do not lock tight before all
screws are put into the rings.
STEP 2
Finish attaching the other brackets
to the triangular plate. Please refer
to the above diagram.
STEP 3
Once the three brackets are
attached, use a wrench to tighten
all the nuts
(A)
. Make sure the
Kamado is placed on a at surface
when tightening.
13 INCH GRILL STAND STYLE
1 (3x)
4 (1x)
A (6x)
2 (1x)
5 (1x)
B (6x)
6 (1x)
C (6x)
3 (1x)
7 (1x)
D (6x)
PART LIST