5
Package and Transportation
Packed in wood crates, the machine should be transported with appropriate
equipment, do not move it with bare hands.
When using a lifting system, such as forklifts or pallets, pay special attention to
balance and prevent tipping.
Normally, the machine should be fixed on wooden pallets to ensure safety
during transportation and storage.
Warning signs should be printed on the package to remind users to follow the
instructions and ensure the machine will not be damaged during loading,
unloading, and transportation.
Fragile Upward Do not flip Keep dry
Stacking limit
When storing or moving the machine, the maximum stack is two units, unless
otherwise specified on the label.
Since the center of gravity of the machine does not coincide with the geometric
center, be careful not to tilt the machine during handling.
Unpacking
Please use tools for unpacking the wood crate. After the unpacking, if any
damage is found, please inform the carrier immediately.
Installation
Install and place the machine securely on a stable and level surface.
To Next Page