6
When handling, do not push or pull the machine to avoid tipping over or
damaging the parts.
Do not place any objects on the machine, as it is open from the top.
The machine should be placed in a well-ventilated place, and away from heat
and ignition sources.
The minimum clearance ≥ 100mm/3.9" should be kept between the
surrounding of the machine and the wall or objects to ensure good operation
performance, ventilation and maintainability.
Before connecting to the power supply, make sure that the voltage and
frequency are consistent with the machine nameplate. A variation of +/-10% of
the normal voltage is allowed, and the machine should be connected to an
effective ground connection.
Storage
Turn off the power and unplug the machine
Empty the compartment and clean it
Keep the lid slightly open to ensure ventilation and avoid mildew or odors
Disposal
Temporary storage of special wastes may be permitted before disposal or final
disposal.
In all cases, the applicable environmental laws of the user's country must be
complied with.
Correct disposal of this product
To Next Page