Vestas V136-4.0 MW - User Manual

Evacuation, escape and rescue
instruction for onshore wind
turbine
Document no: 0067–2397 V00
Class: RESTRICTED
Type: T09
VESTAS PROPRIETARY NOTICE: This document contains valuable confidential information of Vestas Wind Systems A/S. It is protected by copyright law as an unpublished work. Vestas reserves all patent, copyright, trade secret, and
other proprietary rights to it. The information in this document may not be used, reproduced, or disclosed except if and to the extent rights are expressly granted by Vestas in writing and subject to applicable conditions. Vestas
disclaims all warranties except as expressly granted by written agreement and is not responsible for unauthorized uses, for which it may pursue legal remedies against responsible parties.

Summary

Purpose

Implementation of Evacuation, Escape, and Rescue

7.1 Evacuation Route, Escape Points, and Rescue Points

Identifies key routes, escape, and rescue points in the nacelle and hub.

7.2 Overview of Zones in Nacelle and Tower

Introduces distinct zones within the nacelle and tower structures for context.

7.2.1 Evacuation Route in Blade

Details the procedure for evacuation from the blade platform.

7.2.2 Evacuation Route in Hub

Describes the evacuation path from the hub to the nacelle platform.

7.2.3 Evacuation Routes in Nacelle

Outlines the path for evacuation from the nacelle platform to the yaw deck.

7.2.4 Evacuation from Nacelle Roof

7.2.5 Evacuation in Yaw Deck

7.2.6 Evacuation in Tower (T3-T1)

7.3 Escape Route

7.3.1 Escape Route in Hub and Nacelle

7.4 Rescue Route

7.4.1 Rescue Route from Blade

7.4.2 Rescue Route from Hub Platform

7.4.3 Rescue Route in Nacelle

7.4.4 Rescue from Yaw Deck

7.5 Tower, Evacuation, and Rescue (T3-T1)

7.5.1 Rescue with Tower Ladder

8 Safety Equipment

8.1 Safety Equipment Placement

Vestas V136-4.0 MW Specifications

General

Rated Power	4.0 MW
Rotor Diameter	136 m
Cut-in Wind Speed	3 m/s
Rated Wind Speed	12 m/s
Cut-out Wind Speed	25 m/s
Swept Area	14, 527 m²
Operational Wind Speed	3-25 m/s
Turbine concept	Upwind
Operational temperature range	-20°C to +40°C
Control system	OptiSpeed
Generator type	Doubly Fed Induction Generator (DFIG)