To Next PageTo Next Page
Need help?Do you have a question about the Vestax QFO and is the answer not in the manual?
General| Type | Turntable |
|---|---|
| Channels | 2 |
| EQ | 3-band EQ |
| Crossfader | Yes |
| Drive Method/System | Direct Drive |
| Speeds | 33 1/3, 45 RPM |
| Tonearm | S-shaped tonearm |
| Cartridge | Not Included |
| Inputs | 2 x Line, 2 x Phono |
| Motor | DC Motor |
| Platter | Aluminum Diecast |
| Pitch Control | +/-50% |
Lists all included parts and accessories for initial setup of the turntable.
Explains the controls and indicators on the mixer section's top panel.
Details controls located on the side and bottom panels of the mixer section.
Details audio and power connections on the rear panel of the unit.
Explains the operation of the turntable's start/stop, speed, pitch, and other controls.
Step-by-step guide for assembling the turntable platter and main unit.
Instructions for attaching the balance weight to the tonearm.
Instructions on how to place and use the slip mat on the platter.
Guide for installing the audio cartridge onto the tonearm.
Recommendations for placing the unit to ensure optimal performance and prevent issues.
Details on connecting the unit to power and audio sources.
Steps to properly balance the tonearm for accurate tracking.
Guide for adjusting the tone arm height for optimal stylus performance.
Specific instructions for playing 7-inch EP records.
Detailed steps for replacing the cross fader unit.
Guide for attaching the VESTAX insulater to suppress howling.
Guide for attaching the VESTAX QFO hook for shoulder/hip use.
