21 FILTER Activate platter lter mode. The Platter now acts as a combo lter.
22 CHANNEL FADER Adjust Channel Volume
23 CROSSFADER Fade between the two channels
24 CUE Cue selected channel
NOTE: When using the CUE function, you can adjust the CUE MIX between the cue output and the master output. This is done by using CUE MIX found
in the SETUP screen under the MIXER tab.
NOTE: Due to Vestax Typhoon mapping limitations, there is no Sync Off functionality. To turn Sync Off, click the OFF button on screen in Serato DJ
Using the Tool Tips
Click on the icon to enable Tool Tips. This is located in between the MIDI
and setup button in the top right hand corner of the screen. Tool Tips provide
a handy way to learn the various features of Serato DJ.
Move the mouse over a section of the screen to bring up a context sensitive
tool tip. Holding the mouse over the button with Tool Tips turned on will
show you a list of all keyboard shortcuts.
For more information about how to use Serato DJ, please go to our website
www.serato.com or refer to the Serato DJ Software Manual. For more
information on your controller, please refer to the hardware manual.
For further help, please contact support@serato.com or go to www.serato.com/
dj/support
To Previous Page
Loading...
Need help?
General
