8
GB
The appliance is intended for connection
to alternating current. The required voltage
(V) and frequency (Hz) are stated on the
nameplate inside the appliance. Power
must be connected via an independent wall
socket outlet.
If the mains lead has been damaged, it
must be replaced with a corresponding
type supplied by the manufacturer or an
approved service centre.
Technical data
This appliance complies with CE marking
regulations, directives and standards.
Low Voltage Directive 73/23/EEC.
EMC Directive 89/336/EEC.
Council Directive 92/75/EEC on the energy
labelling of household appliances as
subsequently amended by 94/2/EC and
2003/66/EC.
Directive 96/57/EC on energy effi ciency
requirements, and subsequent
amendments.
Electrical connection
To Next Page
Loading...
