To Next PageTo Next PageWhy Vestil EHN-60-T pump will not lift to full height and feels unsteady?
If the Vestil Chain Hoists pump doesn't lift to its full height and feels unsteady, it could be due to the reservoir being overfilled or a low hydraulic oil level. Check the oil level by removing the filler plug and fill the oil to the correct level.
Why does the Vestil EHN-60-T pump feel unsteady under load?
If the pump feels unsteady under load, the pump seal could be worn out. Replace the cup seal with a new one.
Instructions for raising a load by operating the release valve.
Guidance on hydraulic system maintenance and fluid types.
Defines eligibility for requesting warranty service.
Defines an original part for warranty claims.
Outlines requirements for a warranty service request.
Details components and parts covered by the warranty.
Specifies the duration of the warranty for components.
Explains Vestil's procedure for correcting covered defective parts.
Lists exclusions and conditions that void the warranty.
Clarifies Vestil's policy on other express or implied warranties.
General| Brand | Vestil |
|---|---|
| Model | EHN-60-T |
| Category | Chain Hoists |
| Language | English |
