Vestil EPC Series - User Manual

Table of Contents Rev. 3/12/2021 EPC MANUAL
Table of Contents Copyright 2021 Vestil Manufacturing Page 1 of 11
EPC-SERIES VERTICAL PLATE CLAMPS
USE AND MAINTENANCE MANUAL
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be contacted online at https://www.vestil.com/page-parts-request.php
.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
https://www.vestil.com/page-
manuals.php.
Table of Contents
Page
Specifications…………………..………………………..……………………………………………...
2
Signal Words….…………………………………………………………………………..…………..…
2
Safety Instructions……………….…………………..………………..………………..…………..…..
3 - 4
National Standards……………………………………………………………………………………...
4
Minimum Uniform Load Weight & Uniform Capacity………………………………………………...
4
Exploded View & Bill of Materials……………….……………………………………………………..
5
Using the Plate Clamp.…………………………………………………….………………...…………
5, 6, 7, 8
Record of Satisfactory Condition………………………………………………………………………
8
Load Tests……………………………………………………………………………………………….
9
Inspections & Maintenance……………………………………………………………………….……
9
Labeling Diagram……...……………………….……………………………………………..………...
10
Limited Warranty…...…………………………………………………………..…………..…………..
11
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com e-mail: info@vestil.com

Summary

Receiving Instructions

Technical Service & Replacement Parts

Electronic Copies of Instruction Manuals

Specifications

Signal Words

Explains hazard level indicators used in the manual.

Safety Instructions

National Standards

Minimum Uniform Load Weight & Uniform Capacity

Exploded View and Bill of Materials

Using the Plate Clamp

Lifting Rules

Provides essential rules for safe lifting operations with the clamp.

Record of Satisfactory Condition (The Record)

Load Tests

Inspections and Maintenance

Inspection before each use

Describes the daily checks required before operating the clamp.

Monthly inspections

Details comprehensive monthly checks by a qualified person.

Labeling Diagram

Data Tag

Explains the data tag containing model, serial, and capacity information.

Limited Warranty

Who may request service?

Specifies who is eligible to request warranty service.

What is covered under the warranty?

Details the types of defects and parts covered by the warranty.

How long is the warranty period?

States the duration of the warranty for different components.

What is not covered by the warranty?

Lists events and conditions that will void the product's warranty.

Vestil EPC Series Specifications

General

Brand	Vestil
Model	EPC Series
Category	Power Tool
Language	English