Vestil SWA-50 - User Manual

Table of Contents Rev. 9/19/2018 SWA, MANUAL
SWA-50, SWA-70, & SWA-51-AR Semi-Automatic Stretch Wrap Machines
Instruction Manual
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance:
For answers to questions not addressed in these instructions and to order replacement parts,
labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The
department can also be contacted online at http://www.vestilmfg.com/parts_info.htm
.
Vestil Manufacturing Co.
www.vestilmfg.com
Table of Contents
Specifications…………….…………………………………..……………………………………………………………… 2
Signal Words….……………………………………………………………………………………………………… …….. 2
Hazards of Improper Use……………………………………………………………………..…………………….. …….. 3
FIG. 1: SWA-50 exploded parts diagram & bill of materials……………………………………………………………. 4
FIG. 2A: Stretch wrap carriage subassembly exploded parts diagram & bill of materials…………………… …….. 5
FIG. 2B: Manual counterbalanced mast subassembly exploded parts diagram & bill of materials………… …….. 5
FIG. 2C: Thrust bearing subassembly exploded parts diagram & bill of materials…………………………… …….. 5
FIG. 3: Power unit subassembly with sheave exploded parts diagram & bill of materials…………………... …….. 6
FIG. 4: SWA-70 exploded parts diagram & bill of materials…………………………………………………….. …….. 7
FIG. 5: SWA-51-AR exploded parts diagram & bill of materials………………………………………………………. 8
FIG. 6: Electrical system diagram………………………………………………………………………………….. …….. 9
FIG. 7: Powered mast electrical diagram…………………………………………………………………………. …… 10
Delta Motor Speed Controller………………………………………………………………………………………. …… 11
Installation……………………………………………………………………………………………………………. 12 – 13
Stretch Wrap Holder Assembly……………..……………………………………………………………………… …… 13
Belt Tensioning Procedure …………..
…………………………………………………………........................... 14 – 15
Use Instructions……………………………………………………………………………………………………… 15 – 16
Inspections & Maintenance……………………………………………………………………………………………….. 16
Labeling Diagram…………..…...…………………………………………………………………………………………. 17
Troubleshooting……………………………………………………………………………………………………………. 18
Limited Warranty…...……………………………………………………………………………………………………… 19
Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 1 of 19

Vestil SWA-50 Specifications