Assembly instructions：
Open the packaging
and remove the
tent and accessories.
Spread out the tent, find the pull rope in the middle of one side (as
shown in the picture), and pull it up.
According to the second step, continue to pull apart
the other sides, and finally have someone hold down
both sides of the tent. One person enters the inside
of the tent to lift the top.
Enter the inside of the tent and use
2 fiber poles to support the
door as shown in the picture.
Fix the corners with
ground nails, tie the
camp ropes, and then
fix them with ground
nails.
After the construction is completed, the matching cover can also
be used to fix it on the six sides of the tent with Velcro on the
cover, providing shade and rain protection.
To Next Page
Loading...
