2.Replace the eyelet of your return inlet with part "l", ensuring that the opening faces
downward so as not to interfere with the operation of the cleaner. If your pool is
equipped with a vacuum plug, follow step #3. If not, go directly to step
#4.
3.Connect part "H" to your Vac plug. Connect the regulator "G" to part"H". Make
sure that the arrow under the regulator is pointed toward the Vac plug. Now go
directly to step #5.
4.Assemble the two elbow connectors "F" to the regulator "G". lnsert the
attachment "H" facing downward and then the regulator. Take care the arrow under
the regulator is pointed towards the skimmer.
To Next Page
Loading...