- Elemental fluorine, three fluoride and alkali metals will corrode the
PTFE and Halogen alkanes making it expand at room temperature.
- Molten alkali, alkaline earth metals or their solution, as well as the
powder in the second and third ethnic of the Periodic Table of
Elements will have a chemical reaction with PTFE when
temperature reaches 300 ~ 400℃ .
Check the instrument and accessories prior to each use. Do not use
damaged components. Safe operation is only guaranteed with the
accessories listed in the “Accessories” section. Accessories must be
securely attached to the device and must be removed when not in use.
Always disconnect the power before fitting accessories.
When the external temperature sensor is needed, the tip of the
measuring sensor must be at least 5-10 mm from vessel bottom and
wall.
The instrument can only be fully disconnected from the main power
supply by turning off the main or disconnecting the plug.
The voltage stated on the label must correspond to the main power
supply.
Ensure that the main power supply cable does not touch the hotplate.
Do not cover the device.
The instrument must only be operated by experts.
Keep away from high magnetic fields.
SAVE THESE INSTRUCTIONS
Proper use
The instrument is designed for mixing and/or heating liquids in schools,
laboratories or factories
Observe the minimum distances between multiple units, and distances
To Next Page
Loading...
