S t e p 8 ： A d j u s t t h e e c c e n t r i c w h e e l
TIPS：How to determine the tightness of eccentric nuts?
Under the condition of ensuring that the bracket does not shake, you can lift one end of the
machine to an angle of 45 degrees with the horizontal plane, and release the X-axis or Y-axis
bracket from a high place. If the bracket can slide at a constant speed to the end, the tightness
is suitable.
Use a wrench to turn
the eccentric nut to
adjust the tightness of
the guide wheel and
the guide rail
S t e p 7 ： I n s t a l l t h e c a b l e
1
2
3
4
5
blue
terminal
To Next Page
Loading...