a) When mixing，rotate the hand wheel to raise the bowl until you feel it
touch the stop，this also makes the bowl more accessible for filling.
b) After mixing
，
rotate the hand wheel to lower the bowl. It is necessary to
lower the bowl to change agitators, avail to remove the bowl or agitators.
Note: When assembling an agitator the bowl must be in the down position,
Slip the agitator up on the shaft and turn until the driving pin in the shaft
reaches the L-shaped slot in the agitator shank, avoid the agitator to be
fallen down in running.
Maintenance
After use each time，an carefully the bowl agitators etc，make sure to keep
the machine clear.
Lubricate the bowl slide ways occasionally by applying a small amount of
oil or grease with the tip of linger.
To Next Page
Loading...
