VEVOR HPN-120GK2301 - User Manual

Technical Support and E-Warranty Certificate www.vevor.com/support
TRANSFORMER
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

Summary

Safety Information

General Safety Precautions

Key safety guidelines for installation and use, including placement and electrical connections.

Technical Parameters

Output Power Distribution Note

Explains how total power is divided among three outputs, with maximum limits per output.

Installation Steps

Preparing the Cable

Instructions for stripping landscape wire insulation to 1/2 inch for connection.

Connecting the Cable to the Transformer

Details on connecting landscape wires to the 'COM', '12V', or '14V' terminal clamping plates.

Placing Fixtures and Routing Cable

Guidance on positioning fixtures and routing low voltage cable to avoid exceeding transformer rating.

Attaching Your Fixtures

How to connect fixtures to the cable using connectors, ensuring proper contact and illumination.

Mounting the Transformer

Instructions for wall mounting the transformer at a recommended height of 39-59 inches from the ground.

Mounting the Photocell

Steps for mounting the photocell bracket and sensor, and advice on sensor placement for optimal performance.

Protecting or Hiding the Cable

Guidance on covering or burying the cable, and a warning about not coiling cable around the transformer.

Operation Modes

Operating in Manual Mode

How to activate manual mode to turn lights on/off as needed, using the ZONE and MANUAL buttons.

Setting Photocell Auto ON;OFF

Enabling automatic operation where the photocell controls lights based on dusk and dawn.

Setting Photocell ON;Time OFF

Configuring the photocell to turn lights on at dusk and off after a set time duration (1-12H).

Troubleshooting

Circuit Protector Reset

Information on circuit protectors and how to reset them when output overload protection is activated.

VEVOR HPN-120GK2301 Specifications