VEVOR KD-68081 User Manual

Technical Support and E-Warranty Certificate
www.vevor.com/support
JEWELRY POLISHER TUMBLER
USER MANUAL
We continue to be committed to offering tools at competitive prices. "Save Half", "Half Price",
or any other similar expressions used by us only represent an estimate of savings you might
benefit from buying certain tools with us compared to the major top brands and do not
necessarily mean to cover all categories of tools offered by us. You are kindly reminded to
verify carefully when placing an order with us if you are saving half in comparison with the top
major brands.

VEVOR KD-68081 Specifications

General

Brand	VEVOR
Model	KD-68081
Category	Sander
Language	English

Summary

Important Safety Warnings

Product Characteristics

General Safety Rules

Understand Machine Operation and Hazards

Read owner's manual carefully to learn machine applications, limitations, and potential hazards for safe use.

Ensure Proper Grounding and Guards

Verify tools are properly earthed and guards are in place and functional for safe operation.

Maintain Safe Work Environment and Practices

Keep work area clean, avoid dangerous environments, and keep children away during operation.

Workshop Security and Operational Discipline

Secure workshop, use correct tools, do not force the machine, and avoid distractions.

Personal Protective Equipment and Ergonomics

Wear appropriate apparel, avoid over-reaching, and maintain good footing and balance.

Machine Maintenance and Hazard Avoidance

Keep machine in good condition, disconnect power before servicing, and avoid operating under influence.

Dust and Chip Safety Precautions

Wear dust mask, operate in ventilated area, and use dust extraction for operations creating dust or chips.

Polishing Bucket Operation

Polishing Bucket Material and Usage

ABS plastic bucket is not for corrosive liquids; use water only for polishing.

Polishing Process and Control

Capacity Ratio for Polishing Bucket

Guidelines for water, material, steel ball, and polishing solution ratios for optimal results.

Control Work Description

Instructions on using time control, one-way, and two-way rotation settings for polishing.

Polishing Steps

Step 1: Initial Abrasive Preparation

Wash abrasive, add abrasive and coarse grinding powder, and submerge with water.

Step 2: Continue Grinding

Refill barrel, add finely ground powder, water, and polish until shiny.

Step 3: Polishing

Filter product, wash bucket, add water and sand for grit removal, then add polishing powder.

Step 4: Final Polishing

Clean product and barrel, then polish with polishing powder for maximum luster.