This document is a user manual for the VEVOR Grinder, model MFS-140. It provides safety instructions, technical parameters, product structure, operating instructions, and environmental protection information.
Function Description
The VEVOR Grinder MFS-140 is designed for grinding various ingredients. It is intended for indoor use only. The grinder features an adjusting handle to control the thickness of the ground ingredients, allowing for customization based on user needs. The manual emphasizes that the product is designed to provide tools at a competitive price, with expressions like "Save Half" or "Half Price" indicating estimated savings compared to major top brands.
Important Technical Specifications
- Model: MFS-140
- Ratings:
- 110V/60Hz, 1500W
- 230V/50Hz, 1500W
- Continuous Working Time: 1 hour
- Capacity: ≥45kg/hour
- Components:
- Adjusting handle (1)
- Regulating screw (1)
- Plugging plug (1)
- Screw (1)
- Head cover (1)
- Hopper base (1)
- Hopper (1)
- Dust cover (1)
- Millstone base (1)
- Stationary grinding plate (1 dry, 1 wet)
- Latch (2)
- Worm (1)
- Shim (1)
- Moving grinding plate (1 dry, 1 wet)
- Hood (1)
- Motor (1)
- Support frame (R) (1)
- Support rod (1)
- Support frame (L) (1)
- Fastening handle (1)
Usage Features
The grinder is designed for straightforward operation:
- Installation: The machine must be installed and fixed securely before use.
- Power On: Turn on the power to start the machine.
- Container Placement: Containers should be placed at the outlet to collect the ground ingredients.
- Ingredient Loading: Ingredients to be processed are placed into the hopper.
- Thickness Adjustment: The adjusting handle allows the user to control the fineness or coarseness of the ground ingredients.
The manual highlights several important usage precautions:
- Indoor Use Only: The product is strictly for indoor use.
- Unattended Operation: Never leave the grinder unattended while it is running.
- Moving Parts: Wait until all moving parts have stopped and turn off power before removing any part from the grinder.
- Power Cord: Do not pull the power cord to disconnect. Always unplug the power cord from the outlet when not in use, before putting on or taking off parts or accessories, and before cleaning. After unplugging, turn the power switch ON, then OFF to ensure all power is discharged.
- Extension Cords: Do not use extension cords. Always plug directly into a grounded wall receptacle.
- Grounding: The grinder uses a grounded, three-prong plug (hot, neutral, and ground) to prevent electric shock. Do not change or alter the plug in any way, and never break off a grounding prong from a 3-conductor plug, as this will invalidate the warranty and may cause electric shock. The appliance must be grounded while in use to protect the operator from electrical shock.
- Placement: Place the grinder on a firm and stable surface, ensuring it is not near the edge of the worktop where it could be easily pushed off or fall.
- Heat: The Gear Housing and Motor Cover may become hot during operation; do not touch these parts while operating.
- Storage: Do not operate the grinder under a wall cabinet. Always unplug the unit from the electrical outlet when storing it to prevent fire risk, especially if the appliance touches walls or doors when closing.
- Water Exposure: Never plug the grinder in where water may flood the area.
Maintenance Features
The manual provides guidelines for maintenance to ensure safe and prolonged use:
- Damaged Parts Check: Before each use, check for damaged parts, ensuring all components work normally, and perform expected functions. This includes checking for alignment, binding, and installation of moving parts. If any parts, the power cord, or the grinder are damaged, contact customer service.
- Cleaning:
- Always disconnect the grinder from the power source before cleaning.
- Do not submerge the grinder in water or other liquids to protect against electrical shock.
- Never rinse the Grinder Motor under running water; only use a moist cloth to clean the Grinder Motor Unit.
- Attachments: The use of attachments or parts not specifically recommended or sold by the manufacturer will void the warranty and may cause fire, electric shock, or injury.
- Warning Labels: Do not remove warning labels from the grinder, as this voids the product warranty and may result in serious personal injury.
- Cord Replacement: If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
- User Maintenance: Cleaning and user maintenance should not be performed by children without supervision.
The manual also includes environmental protection information, stating that the product is subject to European Directive 2012/19/EC and should not be discarded with normal domestic waste but taken to a collection point for recycling electrical and electronic devices.
To Next Page
Need help?
General
