Warning-To reduce the risk of injury, user must read
instructions manual carefully.
CORRECT DISPOSAL OF
Submersible
PUMP
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to a
collection point for recycling electrical and electronic devices
Safety Instructions of the Submersible Pump
The manipulation and utilization of our pump are very simple and convenient. The
user just need stop our a suitable height level of water and link the pump with the
outlet water pipe and then connect the pump with power supply in accordance with
the mark on the label(different country different standard). Thus, the pump can run
well.
To reduce risk of electric shock
•Always unplug the pump from the electric outlet before cleaning and handling.
•Use with clean water only. Do not place it in any liquid. Never let the pump run dry.
•OPTION-The pump is supplied with ground in conductor and a grounding type
attachment plug, and must be connected only to a proper ground outlet to reduce
the risk of electric shock (Europe standard only).
•Do not use the pump in water above 90℉ or 30℃.
•Prevent the water from running into the electrical outlet down the cord.
•Do not lift, carry, or pull the pump by the power cord.
•Do not replace the pump cord. Stop using the pump if it sustains damage (Option
for pump with safe low voltage).
•Always use the transformer provided to run the water pump or consult with your
electrician before other transformer is connected.
•Do not connect the transformer provided to other appliance.
To Next Page
Loading...