switch off the power supply and then clean it.
7. After the use of this machine is completed, turn off the switch, disconnect
the power supply.
4. Maintenance and cleaning:
1. Before cleaning the product, the start switch must be turned off,
disconnect the power supply, wait until the machine stops completely.
2. Clean the product immediately after using.
3. The external of the main body can be wiped with wet cloth, please do not
wash it with water directly, and the unloaded parts can be directly put into
the water to clean.
4. Refer the following the steps below to disassembly the parts to clean:
(1) Unscrew the cover screw, take down the cover.
To Next Page
Loading...