Installation Precautions
Requirements for handling and moving conditions:
When transporting, the cabinet should be kept as straight as possible, and
the inclination should not exceed 45°at most. Do not invert and lie
horizontally.
To operate the ice machine properly and get the best performance,
place the ice machine in the following conditions:
1.Solid and flat ground
Place the ice machine on a solid, level surface to avoid excessive vibration
and noise.
2.Keep away from the heat source
Avoid placing the ice machine near hot equipment such as gas stoves or
stoves. Heating the ice machine can cause a decrease in cooling
efficiency.
3.Avoid direct sunlight
If the ice machine is installed in direct sunlight, it may cause abnormal work
and may shorten the working life of the ice machine.
4.Dry area
Avoid placing the ice machine in a wet area, for example, near a faucet or
near a sink.
After receiving the goods, you have to let the
compressor's lubricating oil settle for 24 hours to start the
use, otherwise it will easily damage the compressor.
If the ice machine is placed in a wet area, a disconnect
switch must be installed and the ice machine must be
grounded. Install the disconnect switch on the power line.
For further information, consult the ice machine retailer or
electrical technician.
To Next Page
Loading...
