equipment, such as dust masks, non-slip safety shoes, strong headgear, or ear
protection used for such circumstances, reduces the personal injury risk .
c) Avoid unintentional starting. Make sure the power tool is turned off before
plugging in the power and / or inserting, picking up or transferring the
battery. If you have your finger on the switch when you are wearing the power tool
or if you plug in the power to the unit, it may cause an accident .
d) Remove any adjustment wrench or wrench before starting the electric tool.
A tool or key located in a rotating piece of equipment can cause injury .
e) Avoid an abnormal posture. Ensure a secure footing and maintain balance
at all times. This ensures better control of the electrical device in unexpected
situations .
f) Dress appropriately. Do not wear loose clothing or jewelry. Keep your hair,
clothes and gloves away from moving parts. Loose clothes, jewelry or long hair
can get caught in the moving parts .
g) If accessories are used for the dust extractor or collection device, make
sure it is properly connected and in use. The use of such devices can reduce
the risk of dust .
USE AND MAINTENANCE OF THE ELECTRIC TOOL
a) Do not use the electrical device by force. Use the right electrical tool for
your application. With a suitable power tool you work better and safer in the
specified power range .
b) Do not use a power tool whose switch is defective. A power tool that can not
be turned on or off is dangerous and must be repaired .
c) Disconnect the plug from the mains socket and / or remove the battery
before making device settings, changing accessories or putting the device
away. Such precautionary measures reduce the risk of accidental starting of the
power tool .
d) Store unused electrical tools out of the reach of children and do not allow
persons who are unfamiliar with the device or this manual, to use the electrical tool.
Electric devices in the hands of laymen are dangerous .
e) Maintain power tools with care. Check that moving parts are working
properly and do not jam, that parts are broken or damaged enough to impair
the functioning of the power tool. Have damaged parts repaired before using
To Next Page
Loading...