the device. Many accidents are caused by poorly maintained electrical tools .
f) Use power tools, accessories, tools etc. according to these instructions.
Take into account the working conditions and the activity to be performed.
The use of power tools for other than intended applications can lead to dangerous
situations .
MAINTENANCE
a) Only have your power tool serviced by qualified personnel using only
identical spare parts. This ensures the safe operation and maintenance of the
electrical tool .
Tacker - Safety instructions
- Always assume that there are staples in the tool. Carefree handling of the
stapler can cause unexpected stapling of the staples and cause injury .
- Never point the tool at yourself or other people in the vicinity. Unexpected
removal may release a clip and cause injury .
- Do not operate the power tool until it is firmly seated on the workpiece. If
the tool has no contact with the workpiece , the clip may bounce off the attachment
site .
- Disconnect the tool from the power supply or the battery when the clips are
clamped inside the tool. If the stapler is connected, it can be accidentally
actuated when removing the hooked staples .
- Be very careful when removing a fixed clip. The system may be cocked and
the clip ejected vigorously as you try to remove the jam .
- Do not use this tacker for fixing electric cables. The unit is not designed to be
used to secure electrical wiring and may damage the insulation of electrical cables,
causing electrical shock and fire hazards .
Maintenance and cleaning
Attention!
- Disconnect the power cable from the mains during maintenance and cleaning!
The electric box is maintenance free .
- Perform the cleaning regularly, ideally after each completed work, and use a dry,
To Next Page
Loading...