Need help?Do you have a question about the Vex Robotics IQ Standard Drive Base and is the answer not in the manual?
Techniques using 1x Beams for assembly and pin removal.
Methods for handling corner connectors and rubber shaft collars.
Guidance on measuring angle beams and shaft lengths.
Assembling the initial chassis and drivetrain components.
Installing gears, wheels, and intermediate drive components.
Completing the drive base build with final parts.
Building the primary chassis and structural components.
Constructing and attaching the robotic arm and claw.
Completing the Clawbot IQ with final parts.
Attaching and connecting various sensors to the Clawbot IQ.
Finalizing sensor connections and setting up driver control.
Building the base chassis and drive system for the Autopilot.
Installing various components and sensors onto the robot.
Completing the robot and preparing it for operation.
General| Category | Toy |
|---|---|
| Type | Robotics Kit |
| Recommended Age | 8+ |
| Material | Plastic |
| Motor Type | Smart Motor |
| Battery Type | Rechargeable Battery Pack |
| Control System | VEX IQ Brain |
| Compatibility | VEX IQ System |
| Dimensions | Approx. 25cm x 20cm x 10cm (varies with build) |
| Weight | Approx. 0.5 kg (varies with build) |
To Next Page
