To Next PageTo Next Page
Need help?Do you have a question about the VEXILAR FL-8SLT and is the answer not in the manual?
General| Brand | VEXILAR |
|---|---|
| Model | FL-8SLT |
| Category | Marine Equipment |
| Language | English |
Provides instructions on selecting a mounting location and securely attaching the FL-8SLT unit using its gimbal bracket.
Details how to properly connect the FL-8SLT to a 12-volt power source, including wire connections and fuse recommendations.
Explains how to mount High Speed transducers on a boat's transom for optimal depth readings at speed.
Describes different mounting methods for Puck Style transducers: in-hull, trolling motor, and portable.
Details the process of gluing a Puck Style transducer to the boat's hull for a hole-free installation.
Explains how to attach a Puck Style transducer to the lower unit of a trolling motor.
Covers temporary mounting of Puck Style transducers using suction cups or arms for portable use.
Details the operation of the power knob for turning the unit on and selecting the desired depth range.
Explains how to adjust the gain control for optimal signal display and target visibility.
Describes the Interference Rejection feature, its activation, and steps for eliminating unwanted interference.
Provides guidance on how to identify fish targets on the FL-8SLT display based on their characteristics.
Differentiates between clutter (small targets) and noise (electrical interference) and their display appearance.
Details using the FL-8SLT for ice fishing, focusing on bait and fish detection within the transducer's cone.
Provides advice on setting the gain control for both ice and open water fishing conditions.
Explains why bait might not be visible and how to improve detection during ice or open water fishing.
Explains how fish appear in different colors based on their position relative to bait and transducer.
Details FL-8SLT run time, battery life factors, and recommendations for charging and storage.
