Need help?Do you have a question about the VEXILAR FLX-28 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Frequency | 200 kHz |
| Auto Zoom Mode | Yes |
| Target ID | Yes |
| Power | 12V DC |
| Power Output (RMS) | 400 watts |
| Depth Range | 300 feet |
| Power Output | 400 watts |
| Interference Rejection | Yes |
| Current Draw | 200 mA |
| Power Output (Peak-to-Peak) | 1000 watts |
| Zoom Zone | Yes |
| Depth Ranges | 20, 30, 40, 60, 80, 100, 120, 200, 300 feet |
| Depth Capability | 300 feet |
| Sonar Technology | Digital Signal Processor |
| Beam Angle | 12 degrees |
| Zoom | Yes |
| Battery | 12V |
Understanding Gain, Range Control, and Interference Rejection for optimal flasher use.
Guide to mounting the flasher unit and connecting its power source.
Detailed comparison of features and specifications across Vexilar FL/FLX series models.
Understanding the FL-8SE's range settings and gain control.
Adjusting the FLX-12's gain for optimal target visibility.
Overview of the different operating modes available on the FL-18.
Adjusting the FLX-20's gain for optimal target visibility and clarity.
Controlling advanced features like zoom, power, and color.
How Auto Range automatically selects the proper depth range.
Introduction to the Broad Band sonar technology and its benefits.
Customizing frequency for specific fishing situations and beam angles.
Step-by-step guide for charging SLA batteries using the 1 Amp Digital Automatic Charger.
To Next Page