Need help?Do you have a question about the VGE Blue-Lagoon BL530 and is the answer not in the manual?
General| Brand | VGE |
|---|---|
| Model | Blue-Lagoon BL530 |
| Category | Lighting Equipment |
| Language | English |
Essential safety guidelines for operating the equipment and handling chemicals.
Overview of the BL530 system's purpose, features, and components.
Instructions for properly mounting and positioning the BL530 unit.
Description of the front panel, display, and control buttons.
Overview of the connection ports on the bottom of the unit.
Step-by-step instructions for installing the suction line and foot filter.
Procedure for connecting the injection line, valve, and pipeline.
How to connect level sensors for low-level detection.
Setting up the system to disable dosage based on water flow.
Diagram of internal electronic board connections for installers.
Initial startup sequence and firmware information display.
Explanation of values and statuses shown on the unit's display.
Accessing and modifying basic system parameters via the front panel.
Accessing and modifying protected system parameters with password.
Step-by-step guide for calibrating the redox electrode with calibration solution.
How to force manual pump activation for temporary system use.
Routine checks for dosing pumps, suction, and head pipes.
Instructions for cleaning dosing pump parts every three months.
Guide for extraordinary maintenance: replacing the peristaltic tube.
Procedure for preparing the pump for winter storage or long periods.
Recommendations for cleaning and storing pH and redox electrodes.
To Next Page