VGE XCLEAR - Settings and Maintenance; Maintenance; Setting the Time

MAINTENANCE
Clean the device with a damp cloth that has been wrung out. Check regularly that no
damp food has caked onto the device, as this can block the rotor and cause damage.
SETTINGS
A Setting time after switching on for first time.
24-hour clock.
B Correcting the current time.
C Dispensing settings. You can set the required
feeding times and duration here.
D Activating continuous dispensing.
E Deactivating continuous dispensing.
F Navigating through the set feeding times.
Confirm
Confirm
Confirm
Confirm
Set hours
Set hours
Set minutes
Press for 3 sec.
Set minutes
Initial use, new unit
Correcting the current time
A
B
hold 3 sec.
for time set
scroll and adjust scroll and adjust
push to conrm
hold 3 sec. for dosing time set
1325
EN
XCLEAR FISH FEEDER MANUAL
|
7