Need help?Do you have a question about the VHT SPECIAL 6 ULTRA and is the answer not in the manual?
General| Power Output | 6 Watts |
|---|---|
| Effects Loop | Yes |
| Channels | 1 |
| Tubes | 1 x 6V6, 1 x 12AX7 |
| Controls | Volume, Tone |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" speaker output |
| Footswitch | Boost |
| Impedance | 4, 8, 16 Ohms |
| Effects | No |
Essential safety guidelines for operating the amplifier, including water, ventilation, and power cord handling.
Introduces the Ultra model's advanced features like extra gain, Watts control, and tone-sculpting capabilities.
Explains the Power Switch, Standby function, Watts control, and Jewel Light indicator.
Details the Clean/Ultra input jacks and the Pull Boost feature on the Volume knob.
Describes the Depth, Texture, Tone, and Volume controls for sound shaping.
Covers the Effects Loop Send/Return and Line Out jack functions.
Details the footswitch jack and the Speaker Output jacks with impedance selection.
Explains the use of the power cord, AC voltage ratings, and the importance of proper AC grounding.
Frequency response graph for the Tone control on the Clean input without Boost.
Frequency response graph for the Tone control on the Clean input with Pull Boost enabled.
Frequency response graph for the Tone control on the Ultra input without Boost.
Frequency response graph for the Tone control on the Ultra input with Pull Boost enabled.
Illustrates the frequency response changes with the 11-position Depth control.
Shows the frequency response variations based on the 3-position Texture switch.
Provides the detailed circuit diagram for the VHT Special 6 Ultra amplifier.
Lists key technical details including power, tubes, controls, dimensions, and weight.
To Next Page
