OP700 / OH850
HOW TO USE OmniPAP
28
Enter Standby Mode
After connecting to the power source, the
device will enter the Standby Mode and
LCD will display the welcome message.
Note : To enable the Auto ON/OFF function, please refer to Menu Introduction.
Start Air Delivery
Manually :
Press the button and the air delivery
will start immediately.
Automatically (OH850) :
When the Auto ON/OFF function is enabled,
the air delivery will start automatically after
you breathe into your mask directly for 3 to
5 times.
Note : To adjust the ramp period, please refer to Menu Introduction.
Using the Ramp Feature
At the beginning of treatment, the "Ramp Function" will enable pressure to
gradually increase to the prescription pressure setting in a preset period of
time. The default ramp period is 10 minutes, and the delivered pressure will
increase proportionally (OP700) or remain at the minimum pressure
(OH850) during ramp period.
To Next Page
Loading...
Need help?
General