EasyManua.ls Logo

viasit Impulse - User Manual

viasit Impulse
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1. Fußkreuz auf den Boden legen.
Place the base on the oor.
Poser le piètement au sol.
Plaats de kruisvoet op de vloer.
2. Gasfeder ins Fußkreuz stecken.
Insert the gas lift into the base.
Insérer le vérin dans le piétement.
Steek de gasveer in het gat van de
kruisvoet.
3. Sitz auf Gasfeder aufstecken.
Locate and drop on the seat
assembly to the gaslift.
Insérer l‘assise sur le vérin.
Zitting op gasveer plaatsen.
4. Rücken auf den vorgesehenen
Haltern positionieren.
Locate the backrest supports onto the
J-bars.
Replacer le dossier dans les supports
prévus à cet effet.
Rugleuning boven rugleuningdragers
positioneren.
5. Rücken in die Halter einführen.
Push the backrest down onto the bars.
Glisser le dossier sur les supports.
Rugleuning over rugleuningdragers
schuiven.
Impulse / Too
Rücken verstellbar / adjustable backrest /
dossier réglable / Rug in hoogte verstelbaar
Montageanleitung / Assembly instructions
Notice d‘assemblage / Montage instructie
Question and Answer IconNeed help?

Do you have a question about the viasit Impulse and is the answer not in the manual?

Summary

Impulse;Too Adjustable Backrest Assembly

Step 1: Place Base on Floor

Place the chair base on the floor.

Step 2: Insert Gas Lift

Insert the gas lift into the chair base.

Step 3: Attach Seat to Gas Lift

Locate and drop the seat assembly onto the gas lift.

Step 4: Position Backrest Supports

Locate the backrest supports onto the J-bars.

Step 5: Insert Backrest

Push the backrest down onto the bars.

Step 6: Adjust Backrest Height

Use height adjustment buttons to lower the backrest.

Step 7: Final Assembly Check

Ensure the chair is ready for use after settling the gas lift.

Impulse;Too Fixed Backrest Assembly

Step 1: Position Seat Assembly on Table

Place the seat assembly with armrests on a table.

Step 2: Insert Backrest into Guides

Insert the backrest onto the guides.

Step 3: Secure Backrest with Screws

Fix the backrest using provided screws.

Step 4: Place Base and Castors

Place the base with castors on a flat surface.

Step 5: Insert Gas Lift

Insert the gas lift into the base.

Step 6: Attach Seat to Gas Lift

Attach the completed seat assembly to the gas lift.

viasit Impulse Specifications

General IconGeneral
Brandviasit
ModelImpulse
CategoryIndoor Furnishing
LanguageEnglish